Carbon and Alloy Steel Wire: Measures in force

Measure in force code (MIF code)

SW

Product information

Product definition

On January 2, 2026, the Canadian International Trade Tribunal found that:

• the dumping of the aforementioned goods under inquiry, that are for commercial distribution or industrial manufacturing (“Industrial Wire”) has caused injury to the domestic industry
• the dumping of the aforementioned goods that are packaged for retail sale to individual consumers for domestic use, not exceeding a weight of 1 kg per retail-ready package (“Retail Wire”) has not caused injury or retardation and is not threatening to cause injury to the domestic industry

Exclusion

On January 2, 2026, the Canadian International Trade Tribunal excluded the following products from its finding:

• High-carbon silico-manganese steel wire in diameters of 5.5 mm to 8.0 mm, with a carbon content of 0.90% to 1.20%, a manganese content of 11.00% to 14.00% (Mn13 grade), a silicon content of 0.30% to 0.80%, a sulfur content of no more than 0.030%, and a phosphorus content of no more than 0.035%, possessing a Brinell hardness (Hardness Brinell Wolfram or HBW) value of 170 to 240, for use in the manufacture of wire mesh conveyor belts for shot-blasting processes in production lines

Investigation information

The dates of the investigative proceedings and findings concerning this case are:

Tariff classification numbers

Subject goods are normally classified under the following tariff classification numbers:

• 7217.10.00.41
• 7217.10.00.42
• 7217.10.00.43
• 7217.10.00.44
• 7217.10.00.45
• 7217.10.00.51
• 7217.10.00.52
• 7217.10.00.53
• 7217.10.00.54
• 7217.10.00.55
• 7217.10.00.59
• 7217.10.00.61
• 7217.10.00.62
• 7217.10.00.63
• 7217.10.00.64
• 7217.10.00.65
• 7217.10.00.66
• 7217.10.00.67
• 7217.10.00.68
• 7217.10.00.71
• 7217.10.00.79
• 7217.10.00.81
• 7217.10.00.82
• 7217.10.00.83
• 7217.10.00.84
• 7217.10.00.85
• 7217.10.00.86
• 7217.10.00.87
• 7217.10.00.88
• 7217.10.00.91
• 7217.10.00.99
• 7217.20.00.10
• 7217.20.00.41
• 7217.20.00.42
• 7217.20.00.43
• 7217.20.00.44
• 7217.20.00.49
• 7217.20.00.51
• 7217.20.00.52
• 7217.20.00.53
• 7217.20.00.54
• 7217.20.00.59
• 7217.20.00.61
• 7217.20.00.62
• 7217.20.00.63
• 7217.20.00.64
• 7217.20.00.69
• 7217.20.00.71
• 7217.20.00.72
• 7217.20.00.73
• 7217.20.00.74
• 7217.20.00.79
• 7217.20.00.81
• 7217.20.00.82
• 7217.20.00.83
• 7217.20.00.84
• 7217.20.00.89
• 7217.20.00.91
• 7217.20.00.92
• 7217.20.00.93
• 7217.20.00.94
• 7217.20.00.99
• 7217.30.00.10
• 7217.30.00.21
• 7217.30.00.22
• 7217.30.00.23
• 7217.30.00.24
• 7217.30.00.29
• 7217.30.00.31
• 7217.30.00.32
• 7217.30.00.33
• 7217.30.00.34
• 7217.30.00.39
• 7217.30.00.41
• 7217.30.00.42
• 7217.30.00.43
• 7217.30.00.44
• 7217.30.00.49
• 7217.90.00.20
• 7217.90.00.91
• 7217.90.00.92
• 7217.90.00.93
• 7229.20.00.90
• 7229.90.00.40
• 7229.90.00.61
• 7229.90.00.62
• 7229.90.00.63
• 7229.90.00.64
• 7229.90.00.71
• 7229.90.00.72
• 7229.90.00.73
• 7229.90.00.74
• 7229.90.00.90

Please note that these tariff classification numbers may apply to goods which are not subject to the Special Import Measures Act (SIMA) measures, may change because of amendments to the Departmental Consolidation of the Customs Tariff, or the subject goods may be imported under tariff classification numbers that are not listed. Refer to the product definition for the authoritative details regarding the subject goods.

For more information on the tariff classification numbers, please refer to the Canada Border Services Agency’s (CBSA) Harmonized commodity description and coding system.

Duty liability (Anti-dumping duties)

Country of origin or export: China, Chinese Taipei, India, Italy, Malaysia, Portugal, Spain, Thailand, Türkiye, and Vietnam

The following table identifies the exporters who currently have been issued normal values. Please refer to the Normal value model ID Table for information relating to model IDs, model descriptions and units of measure. Information regarding the normal values of subject goods should be obtained from the exporter. Please note that model information is posted only for exporters who have successfully enrolled in an Exporter ID.

For importations of subject goods for which the exporter has not been issued specific rates, the anti-dumping duties are equal to:

Disclosure of normal values and amounts of subsidy

The liability for anti-dumping duties results from the proceedings conducted under SIMA from the finding of the Canadian International Trade Tribunal (CITT). Information regarding the normal values of the subject goods in question and the amount of anti-dumping duties payable should be obtained from the exporter. Related information may be made available to importers on a need-to-know basis in accordance with the provisions of Memorandum D14-1-2: Disclosure of Normal Values, Export Prices, and Amounts of Subsidy Established Under the Special Import Measures Act to importers.

General information for CBSA assessment and revenue management (CARM)

CARM is the official system of record for the assessment and collection of duties and taxes on imported commercial goods. In most circumstances, the CARM system will automatically calculate the amount of SIMA duties payable based on information provided; however, it is still your responsibility to verify that the amounts assessed are correct and, if necessary, self-declare correct amounts. For additional information relating to CARM and self-assessing SIMA duties, please refer to the Guide for self-assessing Special Import Measures Act duties and applicable D-Memorandums.

Requests for re-determination information for CARM

Requests for re-determination relating to SIMA duties must be filed by the importer or the importer’s agent via the CARM Client Portal (CCP), through the Statements of adjustment and appeals. Failure to submit correctly may result in rejection and/or delayed processing.

Summary decisions made by the CBSA respecting whether an imported good is subject to this measure in force can be found on President-level re-determinations.

Information required on customs documents

The import documentation should include the information listed below. Failure to provide this information may result in the application of penalties to the importer, pursuant to the Administrative Monetary Penalty System (AMPS).

The import documentation should clearly indicate the following:

• Confirmation whether the product is subject to anti-dumping duty and/or countervailing duty
• Exporter ID
• Name and address of producer/manufacturer
• Name and location of plant/factory of production
• Place from which direct shipment to Canada began
• Name and address of vendor (if different from the producer)
• Country of origin
• Country of export
• Canadian customer’s name and address
• Canadian importer’s name and address (if different from the customer)
• Full product description of the goods, including:
  • Product number
  • Product name
  • Unique product code
  • Specification (applicable standard)
  • Grade
  • Carbon content (%)
  • Residual chemical composition requirement (Y/N, as %)
    • Copper
    • Nickel
    • Chromium
    • Molybdenum
    • Tin
    • Vanadium
    • Nitrogen
    • Other (specify each)
  • Nominal wire diameter (mm)
  • Coating
  • Coating thickness
  • Surface finish
  • Heat treatment (specify each)
  • Shape
• Date of sale, date of shipment
• Quantity (state unit of measure, e.g. kilograms, pounds, metric tonnes, etc.)
• Unit selling price and total selling price to importer in Canada
• Currency of settlement used (e.g. US$, CDN$, etc.)
• Terms and conditions of sale (e.g. FOB, CIF, etc.)
• All costs, expenses, and charges incurred by the exporter and vendor in the shipment of the subject goods to Canada (includes inland and ocean freight, insurance, duties, port and handling charges, etc.) and
• The amount of any export taxes applicable to the goods

Appeal decisions relating to subjectivity

Summaries of appeal decisions made by the CBSA respecting whether an imported good is subject to this measure in force can be found on President-level re-determinations.

Email for duty assessment questions

SIMA_Compliance-Observation_LMSI@cbsa-asfc.gc.ca

CITT reference number(s)

• PI-2025-001
• NQ-2025-003