Language selection


Concrete reinforcing bar: Measures in force

Dumping (China, South Korea, and Türkiye) and subsidizing (China)

Measure in force code (MIF code)


Product information

Product definition

"Hot-rolled deformed steel concrete reinforcing bar in straight lengths or coils, commonly identified as rebar, in various diameters up to and including 56.4 millimeters, in various finishes, excluding plain round bar and fabricated rebar products, originating in or exported from the People's Republic of China, the Republic of Korea, and the Republic of Turkey."


"10-mm-diameter (10M) rebar produced to meet the requirements of CSA G30 18.09 (or equivalent standards) and coated to meet the requirements of epoxy standard ASTM A775/A 775M 04a (or equivalent standards) in lengths from 1 foot (30.48 cm) up to and including 8 feet (243.84 cm)."

Investigation information

The dates of the proceedings concerning this case are:

Action Date
Initiation of investigation June 13, 2014
Preliminary determination September 11, 2014
Final determination December 10, 2014
Canadian International Trade Tribunal finding January 9, 2015
Re-investigation June 29, 2016
Re-investigation September 1, 2017
Re-investigation May 4, 2018
Normal value review: Icdas December 18, 2018
Normal value review: Colakoglu December 18, 2018
Canadian International Trade Tribunal's order April 18, 2019
Expiry review determination May 22, 2020
Canadian International Trade Tribunal's order
Normal value review: Kaptan
Normal value review: İçdas
Normal value review: Kroman
Normal value review: Colakoglu

Tariff classification numbers

Beginning January 1, 2022, under the revised customs tariff schedule, subject goods are normally classified under the following tariff classification numbers:

  • 7213.10.00.11
  • 7213.10.00.12
  • 7213.10.00.13
  • 7213.10.00.90
  • 7214.20.00.11
  • 7214.20.00.12
  • 7214.20.00.13
  • 7214.20.00.14
  • 7214.20.00.21
  • 7214.20.00.22
  • 7214.20.00.23
  • 7214.20.00.24
  • 7214.20.00.31
  • 7214.20.00.32
  • 7214.20.00.33
  • 7214.20.00.34
  • 7214.20.00.90
  • 7215.90.00.20
  • 7215.90.00.30
  • 7227.90.00.50
  • 7228.30.00.51
  • 7228.30.00.52
  • 7228.30.00.53

Please note that the tariff classification number may apply to goods which are not subject to the Special Import Measures Act (SIMA) measures, may change because of amendments to the Departmental Consolidation of the Customs Tariff, or the subject goods may be imported under tariff classification numbers that are not listed. Refer to the product definition for the authoritative details regarding the subject goods.

For more information on the tariff classification numbers, please refer to the Canada Border Services Agency’s (CBSA) Harmonized commodity description and coding system.

Duty liability (Anti-dumping duties)

Country of origin or export: China, South Korea and Türkiye

The following table identifies the exporters who currently have been issued normal values. Please refer to the Normal value model ID table for information relating to model IDs, model descriptions and units of measure. Information regarding specific normal values of subject goods should be obtained from the exporter. Please note that model information is posted only for exporters who have successfully enrolled in an Exporter ID.

Country Exporter Exporter ID Cooperative since Last revised
Türkiye Çolakoğlu Metalurji A.S. 746235084RM0002
İçdas Çelik Enerji Tersane ve Ulaşım A.Ş. 749962007RM0001
Kaptan Demir Celik Endustrisi ve Ticaret A.S. 774759807RM0001
Kroman Çelik Sanayii A.Ş. 781800008RM0001
Ekinciler Demir ve Çelik Sanayi A.Ş. Exporter has not applied

For importations of subject goods originating in or exported from China, South Korea, and Türkiye for which the exporter has not been issued specific normal values, the anti-dumping duty is equal to 41.0% of the export price.

Duty liability (Countervailing duties)

Country of origin or export: China

Effective on imports of subject goods released by the CBSA on or after May 4, 2018:

No exporters in China received a specific amount of subsidy in the most recent subsidy re-investigation. Please consult the CBSA's Notice of conclusion of re-investigation.

For importations of subject goods originating in or exported from China for which the exporter has not been issued specific amounts of subsidy, the countervailing duty is equal to 469 CNY per metric tonne.

Disclosure of normal values and amounts of subsidy

The liability for anti-dumping and countervailing duty results from the proceedings conducted under SIMA and from the finding of the Canadian International Trade Tribunal (CITT). Information regarding the normal value and amount of subsidy of the subject goods in question and the amount of anti-dumping and countervailing duty payable should be obtained from the exporter. Related information may be made available to importers on a need-to-know basis in accordance with the provisions of Memorandum D14-1-2, Disclosure of Normal Values, Export Prices, and Amounts of Subsidy Established Under the Special Import Measures Act.

For information on duty assessment, refer to the Guide for self-assessing SIMA duties.

Information required on customs documents

The import documentation should include the information listed below. Failure to provide this information may result in the application of penalties to the importer, pursuant to the Administrative Monetary Penalty System (AMPS).

The import documentation should clearly indicate the following:

  • Confirmation whether the product is subject to anti-dumping or countervailing duties
  • Exporter ID
  • Name and address of producer/manufacturer
  • Name and address of vendor (if different from the producer)
  • Customer's name and address
  • Canadian importer's name and address (if different from the customer)
  • Full product description of the goods, including:
    • Model ID
    • Model description
    • Specification: Indicate the specification of the concrete reinforcing bar (e.g. CAN/CSA-G30.18 M92)
    • Grade: Indicate the grade applicable to the concrete reinforcing bar (e.g. 400W)
    • Diameter: Indicate the diameter of the concrete reinforcing bar in millimetres
    • Length: Indicate the length of the concrete reinforcing bar in metres
    • Coating: Indicate the coating of the concrete reinforcing bar (epoxy, galvanized, uncoated, etc.)
    • Type of steel: Indicate the type of steel of the concrete reinforcing bar (e.g. carbon, low alloy, alloy, etc.)
  • Date of sale, date of shipment
  • Quantity (including, the unit of measure)
  • Unit selling price, total selling price
  • Currency of settlement used (e.g., US$, CDN$, etc.)
  • Terms and conditions of sale (e.g., FOB, CIF, etc.)
  • All costs, expenses, and charges incurred by the exporter and vendor in the shipment of the subject goods to Canada from the point of direct shipment (including, the inland and ocean freight, insurance, etc.)
  • The amount of any export taxes applicable to the goods

Appeal decisions relating to subjectivity

Summaries of appeal decisions made by the CBSA respecting whether an imported good is subject to this measure in force can be found on the President-level re-determinations page.

Email for subjectivity opinions and duty assessment questions

Important Prior to submitting a subjectivity opinion request, please review the “detailed product information”. Each request must be supported with essential information including, but not limited to, pictures, mill certificates, measurements, origin of the goods, etc. in relation to the specific product in question.

Failure to provide sufficient information will result in a rejection of the request by the CBSA.

CITT reference number(s)

  • NQ-2014-001
  • RD-2018-001
  • RR-2019-003
Date modified: