ARCHIVED - Chapter 74 - T2015

Copper and articles thereof

Archived Content

Information identified as archived is provided for reference, research or recordkeeping purposes. It is not subject to the Government of Canada Web Standards and has not been altered or updated since it was archived. Please contact us to request a format other than those available.

PDF (65 KB) [help with PDF files]

Notes.

1. In this Chapter the following expressions have the meanings hereby assigned to them:

(a) Refined copper

  • Metal containing at least 99.85% by weight of copper; or
  • Metal containing at least 97.5% by weight of copper, provided that the content by weight of any other element does not exceed the limit specified in the following table:
Table - Other elements
Element Limiting content % by weight
Ag-Silver 0.25
As-Arsenic 0.5
Cd-Cadmium 1.3
Cr-Chromium 1.4
Mg-Magnesium 0.8
Pb-Lead 1.5
S-Sulphur 0.7
Sn-Tin 0.8
Te-Tellurium 0.8
Zn-Zinc 1
Zr-Zirconium 0.3
Other elements, each
(Other elements are, for example, Al, Be, Co, Fe, Mn, Ni, Si.)
0.3

(b) Copper alloys

Metallic substances other than unrefined copper in which copper predominates by weight over each of the other elements, provided that:

  • (i) the content by weight of at least one of the other elements is greater than the limit specified in the foregoing table; or
  • (ii) the total content by weight of such other elements exceeds 2.5%.

(c) Master alloys

Alloys containing with other elements more than 10% by weight of copper, not usefully malleable and commonly used as an additive in the manufacture of other alloys or as de-oxidants, de-sulphurising agents or for similar uses in the metallurgy of non-ferrous metals. However, copper phosphide (phosphor copper) containing more than 15% by weight of phosphorus falls in heading 28.48.

(d) Bars and rods

Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including "flattened circles" and "modified rectangles", of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including "modified rectangular") cross-section exceeds one-tenth of the width. The expression also covers cast or sintered products, of the same forms and dimensions, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.

Wire-bars and billets with their ends tapered or otherwise worked simply to facilitate their entry into machines for converting them into, for example, drawing stock (wire-rod) or tubes, are however to be taken to be unwrought copper of heading 74.03.

(e) Profiles

Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross-section along their whole length, which do not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. The expression also covers cast or sintered products, of the same forms, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.

(f) Wire

Rolled, extruded or drawn products, in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including "flattened circles" and "modified rectangles", of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including "modified rectangular") cross-section exceeds one-tenth of the width.

(g) Plates, sheets, strip and foil

Flat-surfaced products (other than the unwrought products of heading 74.03), coiled or not, of solid rectangular (other than square) cross-section with or without rounded corners (including "modified rectangles" of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel) of a uniform thickness, which are:

  • of rectangular (including square) shape with a thickness not exceeding one-tenth of the width,
  • of a shape other than rectangular or square, of any size, provided that they do not assume the character of articles or products of other headings.

Headings 74.09 and 74.10 apply, inter alia, to plates, sheets, strip and foil with patterns (for example, grooves, ribs, chequers, tears, buttons, lozenges) and to such products which have been perforated, corrugated, polished or coated, provided that they do not thereby assume the character of articles or products of other headings.

(h) Tubes and pipes

Hollow products, coiled or not, which have a uniform cross-section with only one enclosed void along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons, and which have a uniform wall thickness. Products with a rectangular (including square), equilateral triangular or regular convex polygonal cross-section, which may have corners rounded along their whole length, are also to be taken to be tubes and pipes provided the inner and outer cross-sections are concentric and have the same form and orientation. Tubes and pipes of the foregoing cross-sections may be polished, coated, bent, threaded, drilled, waisted, expanded, cone-shaped or fitted with flanges, collars or rings.

Subheading Note.

1. In this Chapter the following expressions have the meanings hereby assigned to them:

(a) Copper-zinc base alloys (brasses)

Alloys of copper and zinc, with or without other elements. When other elements are present:

  • zinc predominates by weight over each of such other elements;
  • any nickel content by weight is less than 5% (see copper-nickel-zinc alloys (nickel silvers); and
  • any tin content by weight is less than 3% (see copper-tin alloys (bronzes).

(b) Copper-tin base alloys (bronzes)

Alloys of copper and tin, with or without other elements. When other elements are present, tin predominates by weight over each of such other elements, except that when the tin content is 3% or more the zinc content by weight may exceed that of tin but must be less than 10%.

(c) Copper-nickel-zinc base alloys (nickel silvers)

Alloys of copper, nickel and zinc, with or without other elements. The nickel content is 5% or more by weight (see copper-zinc alloys (brasses)).

(d) Copper-nickel base alloys

Alloys of copper and nickel, with or without other elements but in any case containing by weight not more than 1% of zinc. When other elements are present, nickel predominates by weight over each of such other elements.

Supplementary Note.

In this Chapter the expression "unworked", when referring to bars, rods and profiles, means products which have not been subsequently worked after production (for example, not machined, drilled, punched, twisted or crimped).

Statistical Note.

(NB This note does not form part of the Customs Tariff legislation.)

1. For the purpose of subheading 7401.10, the unit of measure (kilogram) refers to the copper content of the matte and shall be the assay quantity without deductions.

Customs Tariff Schedule

Tariff Item SS Description of Goods Unit of Meas. MFN Tariff Applicable Preferential Tariffs
7401.00.0000Copper mattes; cement copper (precipitated copper).KGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7402.00.00 Unrefined copper; copper anodes for electrolytic refining.KGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7402.00.0010Unrefined copper; copper anodes for electrolytic refining. - Black copper and blister copperKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7402.00.0020Unrefined copper; copper anodes for electrolytic refining. - Anodes for electrolytic refiningKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
74.03 Refined copper and copper alloys, unwrought.   
7403.11.0000Refined copper and copper alloys, unwrought. - Refined copper: - Cathodes and sections of cathodesKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7403.12.0000Refined copper and copper alloys, unwrought. - Refined copper: - Wire-barsKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7403.13.0000Refined copper and copper alloys, unwrought. - Refined copper: - BilletsKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7403.19.00 Refined copper and copper alloys, unwrought. - Refined copper: - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7403.19.0013Refined copper and copper alloys, unwrought. - Refined copper: - Other - Ingots, ingot-bars and slabs: - Ingot-bars and slabsKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7403.19.0014Refined copper and copper alloys, unwrought. - Refined copper: - Other - Ingots, ingot-bars and slabs: - IngotsKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7403.19.0090Refined copper and copper alloys, unwrought. - Refined copper: - Other - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7403.21.00 Refined copper and copper alloys, unwrought. - Copper alloys: - Copper-zinc base alloys (brass)KGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7403.21.0010Refined copper and copper alloys, unwrought. - Copper alloys: - Copper-zinc base alloys (brass) - IngotsKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7403.21.0090Refined copper and copper alloys, unwrought. - Copper alloys: - Copper-zinc base alloys (brass) - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7403.22.00 Refined copper and copper alloys, unwrought. - Copper alloys: - Copper-tin base alloys (bronze)KGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7403.22.0010Refined copper and copper alloys, unwrought. - Copper alloys: - Copper-tin base alloys (bronze) - IngotsKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7403.22.0090Refined copper and copper alloys, unwrought. - Copper alloys: - Copper-tin base alloys (bronze) - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7403.29.00 Refined copper and copper alloys, unwrought. - Copper alloys: - Other copper alloys (other than master alloys of heading 74.05)KGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7403.29.0011Refined copper and copper alloys, unwrought. - Copper alloys: - Other copper alloys (other than master alloys of heading 74.05) - Copper beryllium alloys: - IngotsKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7403.29.0019Refined copper and copper alloys, unwrought. - Copper alloys: - Other copper alloys (other than master alloys of heading 74.05) - Copper beryllium alloys: - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7403.29.0030Refined copper and copper alloys, unwrought. - Copper alloys: - Other copper alloys (other than master alloys of heading 74.05) - Copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)KGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7403.29.0090Refined copper and copper alloys, unwrought. - Copper alloys: - Other copper alloys (other than master alloys of heading 74.05) - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7404.00 Copper waste and scrap.   
7404.00.1000Copper waste and scrap. - Spent anodes, not alloyed; With a copper content of less than 94% by weight, not alloyedKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7404.00.20 Copper waste and scrap. - Copper-zinc base alloys (brass) with a copper content of less than 94% by weightKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7404.00.2010Copper waste and scrap. - Copper-zinc base alloys (brass) with a copper content of less than 94% by weight - Containing more than 0.3% of leadKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7404.00.2090Copper waste and scrap. - Copper-zinc base alloys (brass) with a copper content of less than 94% by weight - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7404.00.91 Copper waste and scrap. - Other: - With a copper content of less than 94% by weightKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7404.00.9110Copper waste and scrap. - Other: - With a copper content of less than 94% by weight - Copper-tin base alloys (bronze)KGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7404.00.9190Copper waste and scrap. - Other: - With a copper content of less than 94% by weight - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7404.00.99 Copper waste and scrap. - Other: - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7404.00.9910Copper waste and scrap. - Other: - Other - Copper-tin base alloys (bronze)KGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7404.00.9921Copper waste and scrap. - Other: - Other - Copper-zinc base alloys (brass): - Containing more than 0.3% of leadKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7404.00.9929Copper waste and scrap. - Other: - Other - Copper-zinc base alloys (brass): - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7404.00.9991Copper waste and scrap. - Other: - Other - Other: - Not alloyedKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7404.00.9999Copper waste and scrap. - Other: - Other - Other: - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7405.00.0000Master alloys of copper.KGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
74.06 Copper powders and flakes.   
7406.10.0000Copper powders and flakes.KGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7406.20.0000Copper powders and flakes.KGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
74.07 Copper bars, rods and profiles.   
7407.10 Copper bars, rods and profiles. - Of refined copper   
7407.10.1100Copper bars, rods and profiles. - Of refined copper - Hollow profiles: - UnworkedKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7407.10.1200Copper bars, rods and profiles. - Of refined copper - Hollow profiles: - WorkedKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7407.10.21 Copper bars, rods and profiles. - Of refined copper - Other: - Bars and rods, of which the maximum cross-sectional dimension exceeds 12.7 mm; Solid profilesKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7407.10.2110Copper bars, rods and profiles. - Of refined copper - Other: - Bars and rods, of which the maximum cross-sectional dimension exceeds 12.7 mm; Solid profiles - Bars and rods, unworkedKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7407.10.2190Copper bars, rods and profiles. - Of refined copper - Other: - Bars and rods, of which the maximum cross-sectional dimension exceeds 12.7 mm; Solid profiles - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7407.10.2900Copper bars, rods and profiles. - Of refined copper - Other: - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7407.21 Copper bars, rods and profiles. - Of copper alloys: - Of copper-zinc base alloys (brass)   
7407.21.1000Copper bars, rods and profiles. - Of copper alloys: - Of copper-zinc base alloys (brass) - Bars and rods, for use in the manufacture of welding electrodes, welding caps, electrode adaptors, electrode shanks, electrode holders, seam weld wheels or welding gunsKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7407.21.2100Copper bars, rods and profiles. - Of copper alloys: - Of copper-zinc base alloys (brass) - Hollow profiles: - UnworkedKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7407.21.2200Copper bars, rods and profiles. - Of copper alloys: - Of copper-zinc base alloys (brass) - Hollow profiles: - WorkedKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7407.21.90 Copper bars, rods and profiles. - Of copper alloys: - Of copper-zinc base alloys (brass) - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7407.21.9010Copper bars, rods and profiles. - Of copper alloys: - Of copper-zinc base alloys (brass) - Other - Bars and rods, of a maximum cross-sectional dimension not exceeding 12.7 mm, unworkedKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7407.21.9020Copper bars, rods and profiles. - Of copper alloys: - Of copper-zinc base alloys (brass) - Other - Bars and rods of a maximum cross-sectional dimension exceeding 12.7 mm, unworkedKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7407.21.9030Copper bars, rods and profiles. - Of copper alloys: - Of copper-zinc base alloys (brass) - Other - Solid profiles, unworkedKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7407.21.9040Copper bars, rods and profiles. - Of copper alloys: - Of copper-zinc base alloys (brass) - Other - Bars, rods or solid profiles, workedKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7407.29 Copper bars, rods and profiles. - Of copper alloys: - Other   
7407.29.2100Copper bars, rods and profiles. - Of copper alloys: - Other - Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver): - Bars and rods, of copper-nickel base alloys (cupro-nickel) of which the maximum cross-sectional dimension exceeds 12.7 mm; Solid profiles; Unworked hollow profilesKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7407.29.2900Copper bars, rods and profiles. - Of copper alloys: - Other - Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver): - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7407.29.90 Copper bars, rods and profiles. - Of copper alloys: - Other - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7407.29.9020Copper bars, rods and profiles. - Of copper alloys: - Other - Other - Bars and rods, of a maximum cross-sectional dimension exceeding 12.7 mm, unworked: - Bars and rods, of a maximum cross-sectional dimension exceeding 12.7 mm, unworkedKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7407.29.9040Copper bars, rods and profiles. - Of copper alloys: - Other - Other - Bars, rods or solid profiles, workedKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7407.29.9050Copper bars, rods and profiles. - Of copper alloys: - Other - Other - Hollow profiles: - Hollow profilesKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7407.29.9090Copper bars, rods and profiles. - Of copper alloys: - Other - Other - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
74.08 Copper wire.   
7408.11 Copper wire. - Of refined copper: - Of which the maximum cross-sectional dimension exceeds 6 mm   
7408.11.1100Copper wire. - Of refined copper: - Of which the maximum cross-sectional dimension exceeds 6 mm - Not exceeding 9.5 mm: - Not coated or coveredKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7408.11.1200Copper wire. - Of refined copper: - Of which the maximum cross-sectional dimension exceeds 6 mm - Not exceeding 9.5 mm: - Coated or coveredKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7408.11.20 Copper wire. - Of refined copper: - Of which the maximum cross-sectional dimension exceeds 6 mm - Exceeding 9.5 mm but not exceeding 12.7 mmKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7408.11.2010Copper wire. - Of refined copper: - Of which the maximum cross-sectional dimension exceeds 6 mm - Exceeding 9.5 mm but not exceeding 12.7 mm - Not coated or coveredKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7408.11.2020Copper wire. - Of refined copper: - Of which the maximum cross-sectional dimension exceeds 6 mm - Exceeding 9.5 mm but not exceeding 12.7 mm - Coated or coveredKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7408.11.3100Copper wire. - Of refined copper: - Of which the maximum cross-sectional dimension exceeds 6 mm - Exceeding 12.7 mm: - Not coated or coveredKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7408.11.3200Copper wire. - Of refined copper: - Of which the maximum cross-sectional dimension exceeds 6 mm - Exceeding 12.7 mm: - Coated or coveredKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7408.19.00 Copper wire. - Of refined copper: - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7408.19.0010Copper wire. - Of refined copper: - Other - Not coated or coveredKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7408.19.0020Copper wire. - Of refined copper: - Other - Coated or coveredKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7408.21.0000Copper wire. - Of copper alloys: - Of copper-zinc base alloys (brass)KGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7408.22.0000Copper wire. - Of copper alloys: - Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)KGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7408.29.0000Copper wire. - Of copper alloys: - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
74.09 Copper plates, sheets and strip, of a thickness exceeding 0.15 mm.   
7409.11.00 Copper plates, sheets and strip, of a thickness exceeding 0.15 mm. - Of refined copper: - In coilsKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7409.11.0011Copper plates, sheets and strip, of a thickness exceeding 0.15 mm. - Of refined copper: - In coils - Of a thickness exceeding 0.15 mm but not exceeding 4.75 mm, unworked: - Of a width not exceeding 508 mmKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7409.11.0012Copper plates, sheets and strip, of a thickness exceeding 0.15 mm. - Of refined copper: - In coils - Of a thickness exceeding 0.15 mm but not exceeding 4.75 mm, unworked: - Of a width exceeding 508 mmKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7409.11.0090Copper plates, sheets and strip, of a thickness exceeding 0.15 mm. - Of refined copper: - In coils - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7409.19.00 Copper plates, sheets and strip, of a thickness exceeding 0.15 mm. - Of refined copper: - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7409.19.0040Copper plates, sheets and strip, of a thickness exceeding 0.15 mm. - Of refined copper: - Other - Of a thickness exceeding 0.15 mm but not exceeding 4.75 mm, unworked, of a width exceeding 508 mmKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7409.19.0090Copper plates, sheets and strip, of a thickness exceeding 0.15 mm. - Of refined copper: - Other - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7409.21.00 Copper plates, sheets and strip, of a thickness exceeding 0.15 mm. - Of copper-zinc base alloys (brass): - In coilsKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7409.21.0011Copper plates, sheets and strip, of a thickness exceeding 0.15 mm. - Of copper-zinc base alloys (brass): - In coils - Of a thickness exceeding 0.15 mm but not exceeding 4.75 mm, unworked: - Of a width not exceeding 508 mmKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7409.21.0012Copper plates, sheets and strip, of a thickness exceeding 0.15 mm. - Of copper-zinc base alloys (brass): - In coils - Of a thickness exceeding 0.15 mm but not exceeding 4.75 mm, unworked: - Of a width exceeding 508 mmKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7409.21.0090Copper plates, sheets and strip, of a thickness exceeding 0.15 mm. - Of copper-zinc base alloys (brass): - In coils - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7409.29.00 Copper plates, sheets and strip, of a thickness exceeding 0.15 mm. - Of copper-zinc base alloys (brass): - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7409.29.0040Copper plates, sheets and strip, of a thickness exceeding 0.15 mm. - Of copper-zinc base alloys (brass): - Other - Of a thickness exceeding 0.15 mm but not exceeding 4.75 mm, unworked, of a width not exceeding 508 mmKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7409.29.0090Copper plates, sheets and strip, of a thickness exceeding 0.15 mm. - Of copper-zinc base alloys (brass): - Other - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7409.31.00 Copper plates, sheets and strip, of a thickness exceeding 0.15 mm. - Of copper-tin base alloys (bronze): - In coilsKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7409.31.0040Copper plates, sheets and strip, of a thickness exceeding 0.15 mm. - Of copper-tin base alloys (bronze): - In coils - Of a thickness exceeding 0.15 mm but not exceeding 4.75 mm, unworked, of a width not exceeding 508 mmKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7409.31.0090Copper plates, sheets and strip, of a thickness exceeding 0.15 mm. - Of copper-tin base alloys (bronze): - In coils - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7409.39.00 Copper plates, sheets and strip, of a thickness exceeding 0.15 mm. - Of copper-tin base alloys (bronze): - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7409.39.0030Copper plates, sheets and strip, of a thickness exceeding 0.15 mm. - Of copper-tin base alloys (bronze): - Other - WorkedKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7409.39.0090Copper plates, sheets and strip, of a thickness exceeding 0.15 mm. - Of copper-tin base alloys (bronze): - Other - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7409.40.0000Copper plates, sheets and strip, of a thickness exceeding 0.15 mm. - Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)KGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7409.90.0000Copper plates, sheets and strip, of a thickness exceeding 0.15 mm. - Of other copper alloysKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
74.10 Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials), of a thickness (excluding any backing) not exceeding 0.15 mm.   
7410.11.00 Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials), of a thickness (excluding any backing) not exceeding 0.15 mm. - Not backed: - Of refined copperKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7410.11.0040Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials), of a thickness (excluding any backing) not exceeding 0.15 mm. - Not backed: - Of refined copper - Of a thickness exceeding 0.025 mm but not exceeding 0.15 mm, unworked, of a width not exceeding 508 mmKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7410.11.0090Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials), of a thickness (excluding any backing) not exceeding 0.15 mm. - Not backed: - Of refined copper - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7410.12.00 Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials), of a thickness (excluding any backing) not exceeding 0.15 mm. - Not backed: - Of copper alloysKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7410.12.0040Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials), of a thickness (excluding any backing) not exceeding 0.15 mm. - Not backed: - Of copper alloys - Of a thickness exceeding 0.025 mm but not exceeding 0.15 mm, unworked, of a width not exceeding 508 mmKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7410.12.0090Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials), of a thickness (excluding any backing) not exceeding 0.15 mm. - Not backed: - Of copper alloys - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7410.21.00 Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials), of a thickness (excluding any backing) not exceeding 0.15 mm. - Backed: - Of refined copperKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7410.21.0030Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials), of a thickness (excluding any backing) not exceeding 0.15 mm. - Backed: - Of refined copper - Copper clad laminates, workedKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7410.21.0090Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials), of a thickness (excluding any backing) not exceeding 0.15 mm. - Backed: - Of refined copper - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7410.22.0000Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials), of a thickness (excluding any backing) not exceeding 0.15 mm. - Backed: - Of copper alloysKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
74.11 Copper tubes and pipes.   
7411.10.00 Copper tubes and pipes. - Of refined copperKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7411.10.0010Copper tubes and pipes. - Of refined copper - For plumbing, unworked: - For plumbing, unworkedKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7411.10.0020Copper tubes and pipes. - Of refined copper - For refrigeration or air conditioning (ACR), unworkedKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7411.10.0031Copper tubes and pipes. - Of refined copper - Other, unworked: - Industrial or commercialKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7411.10.0039Copper tubes and pipes. - Of refined copper - Other, unworked: - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7411.10.0040Copper tubes and pipes. - Of refined copper - WorkedKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7411.21.0000Copper tubes and pipes. - Of copper alloys: - Of copper-zinc base alloys (brass)KGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7411.22.0000Copper tubes and pipes. - Of copper alloys: - Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)KGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7411.29.00 Copper tubes and pipes. - Of copper alloys: - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7411.29.0011Copper tubes and pipes. - Of copper alloys: - Other - Unworked: - Industrial or commercialKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7411.29.0019Copper tubes and pipes. - Of copper alloys: - Other - Unworked: - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7411.29.0020Copper tubes and pipes. - Of copper alloys: - Other - Worked: - WorkedKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
74.12 Copper tube or pipe fittings (for example, couplings, elbows, sleeves).   
7412.10.00 Copper tube or pipe fittings (for example, couplings, elbows, sleeves). - Of refined copperKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7412.10.0011Copper tube or pipe fittings (for example, couplings, elbows, sleeves). - Of refined copper - Pressure type: - WroughtKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7412.10.0019Copper tube or pipe fittings (for example, couplings, elbows, sleeves). - Of refined copper - Pressure type: - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7412.10.0090Copper tube or pipe fittings (for example, couplings, elbows, sleeves). - Of refined copper - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7412.20.00 Copper tube or pipe fittings (for example, couplings, elbows, sleeves). - Of copper alloysKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7412.20.0011Copper tube or pipe fittings (for example, couplings, elbows, sleeves). - Of copper alloys - Pressure type: - ForgedKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7412.20.0012Copper tube or pipe fittings (for example, couplings, elbows, sleeves). - Of copper alloys - Pressure type: - CastKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7412.20.0019Copper tube or pipe fittings (for example, couplings, elbows, sleeves). - Of copper alloys - Pressure type: - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7412.20.0090Copper tube or pipe fittings (for example, couplings, elbows, sleeves). - Of copper alloys - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7413.00.00 Stranded wire, cables, plaited bands and the like, of copper, not electrically insulated.KGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7413.00.0013Stranded wire, cables, plaited bands and the like, of copper, not electrically insulated. - Without fittings: - Stranded wireKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7413.00.0019Stranded wire, cables, plaited bands and the like, of copper, not electrically insulated. - Without fittings: - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7413.00.0023Stranded wire, cables, plaited bands and the like, of copper, not electrically insulated. - With fittings: - Stranded wire, plaited bands and the likeKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7413.00.0029Stranded wire, cables, plaited bands and the like, of copper, not electrically insulated. - With fittings: - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
74.15 Nails, tacks, drawing pins, staples (other than those of heading 83.05) and similar articles, of copper or of iron or steel with heads of copper; screws, bolts, nuts, screw hooks, rivets, cotters, cotter-pins, washers (including spring washers) and similar articles, of copper.   
7415.10.0000Nails, tacks, drawing pins, staples (other than those of heading 83.05) and similar articles, of copper or of iron or steel with heads of copper; screws, bolts, nuts, screw hooks, rivets, cotters, cotter-pins, washers (including spring washers) and similar articles, of copper. - Nails and tacks, drawing pins, staples and similar articlesKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7415.21.0000Nails, tacks, drawing pins, staples (other than those of heading 83.05) and similar articles, of copper or of iron or steel with heads of copper; screws, bolts, nuts, screw hooks, rivets, cotters, cotter-pins, washers (including spring washers) and similar articles, of copper. - Other articles, not threaded: - Washers (including spring washers)KGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7415.29.0000Nails, tacks, drawing pins, staples (other than those of heading 83.05) and similar articles, of copper or of iron or steel with heads of copper; screws, bolts, nuts, screw hooks, rivets, cotters, cotter-pins, washers (including spring washers) and similar articles, of copper. - Other articles, not threaded: - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7415.33.0000Nails, tacks, drawing pins, staples (other than those of heading 83.05) and similar articles, of copper or of iron or steel with heads of copper; screws, bolts, nuts, screw hooks, rivets, cotters, cotter-pins, washers (including spring washers) and similar articles, of copper. - Other threaded articles: - Screws; bolts and nutsKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7415.39.0000Nails, tacks, drawing pins, staples (other than those of heading 83.05) and similar articles, of copper or of iron or steel with heads of copper; screws, bolts, nuts, screw hooks, rivets, cotters, cotter-pins, washers (including spring washers) and similar articles, of copper. - Other threaded articles: - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
74.18 Table, kitchen or other household articles and parts thereof, of copper; pot scourers and scouring or polishing pads, gloves and the like, of copper; sanitary ware and parts thereof, of copper.   
7418.10.0000Table, kitchen or other household articles and parts thereof, of copper; pot scourers and scouring or polishing pads, gloves and the like, of copper; sanitary ware and parts thereof, of copper. - Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like: - Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like-3%CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7418.20.0000Table, kitchen or other household articles and parts thereof, of copper; pot scourers and scouring or polishing pads, gloves and the like, of copper; sanitary ware and parts thereof, of copper. - Sanitary ware and parts thereof-3%CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
74.19 Other articles of copper.   
7419.10.0000Other articles of copper. - Chain and parts thereofKGM3%CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7419.91 Other articles of copper. - Other: - Cast, moulded, stamped or forged, but not further worked   
7419.91.1000Other articles of copper. - Other: - Cast, moulded, stamped or forged, but not further worked - Anodes for electroplatingKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7419.91.9100Other articles of copper. - Other: - Cast, moulded, stamped or forged, but not further worked - Other: - For use in Canadian manufacturesKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7419.91.99 Other articles of copper. - Other: - Cast, moulded, stamped or forged, but not further worked - Other: - OtherKGM3%CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7419.91.9910Other articles of copper. - Other: - Cast, moulded, stamped or forged, but not further worked - Other: - Other - Castings, alloyedKGM3%CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7419.91.9990Other articles of copper. - Other: - Cast, moulded, stamped or forged, but not further worked - Other: - Other - OtherKGM3%CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7419.99 Other articles of copper. - Other: - Other   
7419.99.1000Other articles of copper. - Other: - Other - Anodes for electroplatingKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7419.99.2000Other articles of copper. - Other: - Other - Caskets or coffinsNMB9.5%CCCT, LDCT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
GPT 5%
7419.99.90 Other articles of copper. - Other: - Other - OtherKGM3%CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7419.99.9040Other articles of copper. - Other: - Other - Other - Brass plumbing goods, not elsewhere specified or includedKGM3%CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
7419.99.9090Other articles of copper. - Other: - Other - Other - OtherKGM3%CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT: Free
Date modified: