Tariff Classification Advance Ruling
Nikkalite CRG 92000 Series Film

Applicant

Mr. Andy Kato
Nippon Carbide Industries (USA) Inc.
12891 Florence Avenue
Sante Fe Springs, CA  90670
USA

Date of issuance of ruling:

This letter is to advise you that advance ruling #267897, for the Nikkalite CRG 92000 Series Film has been modified and replaced with new advance ruling #271294.

The original ruling, issued on classified the Nikkalite CRG 92000 Series Film under classification number 3919.90.99.90. A review of this ruling has determined that this classification is no longer valid due to tariff changes by Finance Canada.

TRS Number: 271294
Classification Number: 3919.90.00.90
Effective Date:

Product Description

The goods at issue are self-adhesive sheets of plastics of various colors, ranging in thickness from approximately 0.35mm (.035cm) to 0.40mm (0.04 cm). The sheets are constructed of the following layers: a coloured layer of plastics (approximately 8 to 17% by weight of product) composed of a compounded acrylic polymer, specifically a polymer of methyl methacrylate, a thick prismatic layer of plastics (approximately 33 to 49% by weight of product) composed of polycarbonate; a coloured layer of plastics (approximately 10 to 20% by weight of product) composed of a compounded polyester such as polyethylene terephthalate; and, a layer of pressure-sensitive adhesive. These self-adhesive products are backed with a protective, peel off, throw-away of plastics.

Analysis and Justification

In the advance ruling submission, you have suggested that the correct tariff classification number is 3919.90.00.90.

Consideration was given to Chapter 39 of the Customs Tariff. However, the Explanatory Note to heading 39.19 states that "this heading covers all self-adhesive flat shapes of plastics, whether or not in rolls, other than floor, wall or ceiling coverings of heading 39.18. The heading is, however, limited to flat shapes which are pressure-sensitive, i.e., which at room temperature, without wetting or other addition, are permanently tacky (on one or both sides) and which firmly adhere to a variety of dissimilar surfaces upon mere contact, without the need for more than finger or hand pressure."

Based on the available information and the above description, the subject products are coloured, self-adhesive, are a flat shape and pressure-sensitive. They therefore meet the terms of heading 39.19. The classification number for these products is 3919.90.00.90. General Interpretative Rule #1 applies.

Decision

Section 10 of the Customs Tariff directs that classification of imported goods shall be determined in accordance with the General Rules for the Interpretation of the Harmonized System. Section 11 of the Customs Tariff states that in interpreting the headings and subheadings, regard shall be had to the World Customs Organization's (WCO) Explanatory Notes to the Harmonized Commodity Description and Coding System.

General Interpretative Rule 1 (GIR 1) directs that titles of Sections, Chapters and sub- Chapters are provided for ease of reference only. For legal purposes, classification shall be determined according to the terms of the heading and any relative Section and Chapter Notes. Similarly, General Interpretative Rule 6 (GIR 6) directs that classification shall be determined according to the terms of those subheadings and any related Subheading Notes.

The Nikkalite CRG 92000 Series Film is classified under 3919.90.00.90 of the Customs Tariff by application of GIR 1 and 6.

Advance ruling #271294 has replaced the previous advance ruling #267897. This new ruling is effective immediately.

Legislative/Administrative References

This ruling has been issued under paragraph 43.1(1)(c) of the Customs Act and will be honoured by the CBSA for future importations of the goods specified, provided the material facts and circumstances remain as originally presented; all conditions in the ruling have been met; the ruling has not been modified, revoked, revised, or cancelled; and the Customs Tariff legislation has not changed. Should there be a change in the material facts or circumstances pertaining to the goods, you must notify the CBSA as soon as possible. You may request that the Advance Ruling be modified or revoked as of the date of the change.

Importers should quote the advance ruling number at the time of importation in either the description field of the B3 entry document or on the Canada Customs Invoice. Exporters or producers should quote the advance ruling number on the Certificate of Origin or commercial invoice accompanying the goods.

Should you disagree with this advance ruling, you may file a dispute notice under subsection 60(2) of the Customs Act within 90 days of the date of issuance. Please see the procedures outlined in Appendix C of the CBSA's Memorandum D11-11-3, Advance Rulings for Tariff Classification.

This advance ruling is considered 'reason to believe' for the purposes of section 32.2 of the Customs Act and the CBSA's Administrative Monetary Penalty System, described in Memorandum D22-1-1.

All Memoranda referenced in this letter may be accessed on the CBSA website.

Consent to the Public Release of the Advance Ruling

As per your consent statement, we will release this advance ruling to the public, in both official languages, in accordance with the procedures described in Memorandum D11-11-3. The ruling will be published on the CBSA website in 30 days.

CBSA Contact

Mark Grant
Manager, Tariff Policy Unit 'B'
Trade Policy Division
Headquarters, Ottawa

File Number

C-2015-001684

Date modified: